Craftsman Tool Chest Locking Mechanism | Complete Guideline! (2023)

If you are an owner of a garage or a dye mechanic, a toolbox can be a great help. It can protect your tools properly and can provide organized, easy access to your tools.

Well, there are different kinds of toolboxes available. Among them, Craftsman and Husky are two popular brands. You can check out the Husky vs Craftsman tool chest for getting a better concept about these two brands. Here we will discuss craftsman tool chest locking mechanisms.

However, after using the craftsman toolbox a couple of times, you may find it hard to open the drawers. It happens because of a jammed locked mechanism. But don’t you worry anymore. Here we have discussed all necessary details about the procedure of opening craftsman tool chest drawers or how to fix craftsman tool chest drawers.


  • 1 Craftsman Tool Chest Locking Mechanism-Check Out Our Complete Guideline!
    • 1.1 Opening Deadbolt Locks:
    • 1.2 Removing lock from drawers:
  • 2 How to Fix Craftsman Tool Chest Drawers?
    • 2.1 Fixing Process of Rolling Drawer-
    • 2.2 Fixing Process of Friction Slide Drawer-
    • 2.3 Fixing Process of Ball-Bearing Slide Drawer-
  • 3 Some Frequently Asked Questions (FAQs):
    • 3.1 How to fix a craftsman toolbox lock?
    • 3.2 How do you unlock a craftsman toolbox without a key?
    • 3.3 How do you unlock a Craftsman tool chest?
    • 3.4 How do I remove the lid from my Craftsman toolbox?
  • 4 Final Words
(Video) New Craftsman Tool Cabinet Locked Drawers Fix

Craftsman Tool Chest Locking Mechanism-Check Out Our Complete Guideline!

A toolbox helps you to store the tools properly when you are not using them. The larger your tool chest is; the more tools you can store. Craftsman offers a solid steel tool chest for fitting large and heavy tools. Different types of craftsman tool chests are available in the marketplace. Check out our Craftsman tool chest review for better understanding.

However, tool chests are made for giving internal security to the tools. That’s why, once you lock the point of the tool chest, all the drawers are locked. Now we will share some common tips and tricks related to the locking mechanism, such as-

Opening Deadbolt Locks:

Deadbolt locks are the perfect protection against burglary. They are moved by knobs or keys and cannot be opened by knives or any hand tools. But what will happen if you lose the key or break the key? If you fall in that type of situation then-

(Video) Craftsman 41" Tool Cabinet. Fix Stuck Drawers! (CMST82772RB)

  • Take a flat/minus screwdriver and a metal strap. You have to bend the strap at the top for half inches.
  • Place the strap in the rectangular hole of the lock. Then enter the screwdriver and strap together in the hole.
  • Press the screwdriver and one time you will fill the lock. When the lock will be replaced, rotate the strap in anticlockwise or key direction and the lock will be opened.

Removing lock from drawers:

If you don’t need any specific lock-

  • Open that particular drawer and enter the key into the lock. But don’t rotate the key
  • Rotate the round outer rail with your finger and rotate the key clockwise. Eventually, the lock will come out of the chest.

You can even install the lock when you need it by reversing the steps.

Removing The Drawers With The Whole Locking Mechanism

  • Unlock the chest lock and open the top lid or the drawer
  • Look at the connection side of the drawer, where you will find two/three latches. These latches help to lock the entire system
  • Take a thin metal strap and a hammer. Put the strap in the side of the latch and hammer it from outward.
  • The pin will come out and you can now pull off the latch
  • Do the same with the remaining others

Now you can open any drawer without any key. You can install the drawers by performing the reversal of the steps.

(Video) Craftsman Tool Box Drawer Repair.

How to Fix Craftsman Tool Chest Drawers?

Craftsman toolbox is the professional’s choice for its durability. But after using the toolbox for a long time, you find craftsman tool chest drawers stuck. It happens because of dirt, grease, and oil. For this reason, you have to open the drawer or remove it from the chest. Here we will give you some easy tips to solve all tool chest related problems. Let’s get started!

Craftsman tool chests have three types of drawers. Rolling, Friction, ball-bearing. Each has a different type of opening process. They are given below-

Fixing Process of Rolling Drawer-

  • Drag the drawer till its end and raise it upwards

Then clean all the dirt or remove the metal that was stuck in the way of the drawer. At the time of installation, enter the drawer from upward to downward.

Fixing Process of Friction Slide Drawer-

  • Empty the particular drawer you want to open by taking out all the staff
  • Take a metal strap or tension wrench now. Bend the metal strap in the head for half-inch
  • Friction slide drawers have small locks at the end of them, which prevents the drawers from coming out automatically. Put the metal strap or wrench between the slide and glide. Make sure the strap remains in the lock
  • Give stress on the lock and drag the slide at the same time. Eventually, you will open the lock. Repeat the whole process for the lock residing on the other side of the drawer.

After that, clean all the dust properly.

(Video) Craftsman Tool Chest Drawer Install Problems addressed

Fixing Process of Ball-Bearing Slide Drawer-

  • Empty the particular drawer first for your ease.
  • Pull the drawer towards you.
  • If your drawer contains a lever at both ends of the rail, lift the drawers in different directions. And the drawer will come out easily.
  • If your drawer has a tab at both ends of the rail, then press the tab with your fingers. And slide lock bars will open and the drawers will be released.

In this way, you can fix your stuck Craftsman tool chest drawers.

Some Frequently Asked Questions (FAQs):

How to fix a craftsman toolbox lock?

You can fix the lock by replacing it. In the craftsman toolbox, a lock is attached to the cabinet with a clip. For replacing, at first, you have to remove the clip and swap out the lock. To get more working room, remove the top drawer. You’ll need a needle nose plier for removing the clip. Now use one hand to feel the clip and hold the needle nose plier in your other hand. After some time, the clip will be removed. Now place a new lock matching the flat sides with the locking shape, then attach the clip. Now test it!

How do you unlock a craftsman toolbox without a key?

If you have forgotten where you have kept the lock key, you don’t have to panic anymore. You can easily open it up without a key. For this, you need a tension wrench and city rake! At first, put the tension wrench at the keyhole, and use some firm tension. Then pop in the city rake. Now bounce up and down right across the wafers or pairing system. You will find the lock open in no time!

How do you unlock a Craftsman tool chest?

For unlocking the Craftsman tool chest, you have to open the drawer. When the lock of your craftsman is in an open position, place a yardstick inside between the cabinet and top drawer. Now slide until you feel the notch in the slide lock bar and try moving the bar to unlock the drawer.

(Video) Craftsman Tool Box - Remove drawer with friction slides

How do I remove the lid from my Craftsman toolbox?

Without removing the top lid, you can’t open the drawer. So, to remove the lid, you have to make a small hole punch and a hammer. Now in the back of the door, you will find three/two latches. So at first put the punch in one corner of the latch and hit it a few times with a hammer. The pin of the latch then will come out and you can pull out the latch. Where you can find locking mechanisms. In the same way, pull others and remove the lid.

Final Words

Here we have tried to explain all the procedures readily. Remember, the tools are big, heavy and can also cause severe accidents. So while performing any of the above works, be careful.

Well, we hope you will find this piece of content useful. We are grateful to have you till the very end. Have a good day


How does a toolbox lock work? ›

On a toolbox with a lid, the locking bar is operated by the lid. Opening the lid moves the rod, disengaging the locking tabs on the drawers. On a locking filing cabinet, the locking bar is operated by the central lock.

Can a locksmith open a toolbox? ›

A locksmith can open your lock using special tools if you've lost the key. Also, they can offer you replacement keys for the toolbox. When it comes to the broken lock, you might consider rekeying.

How do you open a stiff lock? ›

Lock is stiff and difficult to open

You can apply some graphite spay or silicone based lubricant in the lock, put the key back in and turn it a few times. Never use oil based products such as WD-40 to lubricate locks because although they may help initially, they tend to cause problems with clogging later on.

What type of lock is on a tool box? ›

The current state-of-the-art tool box lock is the cylinder lock. This is the same locking technology used in your front door and your car, and it is a very mature technology.

What are the locks on tool boxes called? ›

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

What tool do locksmiths use to program keys? ›

InstaCode is considered the leading Key Data Software throughout the world. InstaCode is a vital tool for any professional locksmith.

What locks can locksmiths not open? ›

What Types of Locks Can a Locksmith NOT Open?
  • Locks to a Safe. This is one of the most common types of locks that a locksmith cannot open. ...
  • Locks to a Vault. ...
  • Smart Locks. ...
  • Rare or Vintage Locks. ...
  • Locks that Require Visual or Fingerprint Recognition. ...
  • How a Locksmith Opens a Lock.
Jul 9, 2021

How do you pick a locksmith tool lock? ›

Lock Picking Technique
  1. Insert Tension Wrench into the Bottom of Key Hole and Apply Slight Pressure. ...
  2. Insert Pick at Top of Lock. ...
  3. While Applying Slight Torque to Your Wrench, Scrub Your Pick Back and Forth in the Key Hole. ...
  4. Repeat Until All the Pins Set.
Sep 13, 2020

Can you pick a lock without a tension wrench? ›

Picking a lock with paper clips works pretty much the same way as picking a lock with a traditional tension wrench and rake. You just need to turn two paper clips into those two very same tools, and then pick the lock with them like you'd normally do.

What is the tension wrench used for in lock picking? ›

Tension wrenches are used to apply pressure to the bottom of pin tumbler locks to keep pins from being pushed down by the springs after getting set correctly by lock picks.

How do thieves pick locks? ›

Picking a Lock

In order to pick a pin and tumbler lock, all a burglar must do is use special tools to align the pins until the lock can be turned and the door can be opened. The pick, which is a long, thin piece of metal, is used in conjunction with a tension wrench to align all the pins.

How do you release a drawer mechanism? ›

Check the drawer guides to see if there is a clip or locking lever. If you find a clip, remove it. If the drawer guides have a lever, push it while pulling the drawer out.

How do you fix a stuck chest drawer? ›

Fix Sticky Drawers with A Lubricant

Rub the drawer frame — the spots where the drawer glides into the frame — with candle wax, paraffin, or even an old bar of soap to give it a little extra glide. You can also spray them with a product such ad WD-40.

How does a 7 lever lock work? ›

The image above shows a 7 lever mechanical lock. In lever locks, there are two metal casings. The first casing is the one visible to the user. Made from cast iron, the outer casing can handle a lot of tampering and mechanical abrasion before letting the trespasser disturb the internal working of the lock and break it.

How do lever handle locks work? ›

It consists of a handle/lever on a backplate which when pushed down turns the spindle which passes through the door and the tubular latch inside the door allowing the door to be opened.

How do you open a twist off that won't open? ›

You can try draping a textured hand towel or a silicone trivet over the lid for better friction. You can also use a rubber cleaning glove or even try stretching a rubber band around the outside of the lid. All of these will give you a better grip on the lid, making it easier to twist off.

Is it OK to put WD-40 in a lock? ›

Should I use WD40 to lubricate door locks? The simple answer is you should not use WD40 to lubricate locks. WD-40 is one of the solvent-based lubricants and does not contain any lubricant and over time can make your lock even stickier by gumming the lock up.

Is WD-40 good for locks? ›

Do not use WD-40, WD-40 is a solvent, not a lubricant and will, in fact, remove any type of lubricant that is in the cylinder. Use a lubricant that has a silicone, graphite or Teflon base only. Make sure the lock cylinder is facing up and spray or pour the lubricant into the cylinder.

Is graphite or WD-40 better for locks? ›

A: Although WD-40 is magic stuff, it is not the best choice to lubricate automotive door locks and linkages. Although it does a good job of cleaning and temporary lubricating, it goes away, so it makes a good first step. Graphite has long been a popular lube choice, but we like to use bike chain lube.

What are the three basic types of locks? ›

Although there are many types of locks, the four most common are padlocks, deadbolts, knob locks, and levers.

What are the 3 types of key operated lock? ›

Deadbolt locks come in three primary types: single, double and vertical. Single-cylinder deadbolts are the simplest and can be activated from one side via a key. Double-cylinder deadbolts can be used with a key from both sides.

What is a lock What are the different types of locks? ›

A mortise lock generally consists of intricate hardware mounted in the door and is held in place by a set screw and utilizes a cam to actuate the locking hardware. There are many different types of mortice cylinder locks, including three lever mortice locks and five lever mortice locks.

How do you tell if a lock is 5 or 6 pin? ›

Aside from the number of cuts on the key, it's simple to determine if a key is a 5-pin or 6-pin key at a glance: A 6-pin key has a longer keystop on top. A 5-pin plug can be repinned to accomodate a 6-pin key.

How does a 3 digit combination lock work? ›

The combination is made up of three numbers - When entering your combination, you must enter the numbers in the order shown on the combination tag. stop when the first number lines up with the indicator. the first number, and stop when the second number lines up with the indicator.

How does a key mechanism work? ›

Upper pins sit between springs and the pin tumblers. The spring and upper pins are fully extended and the pin tumblers are aligned inside the barrel of the lock. When a key is inserted into the lock they press against the pin tumblers forcing them into the upper chamber pins and compressing the springs.

What is a spacer lock? ›

Locking spacers keep the fork in place when the top cap and stem are removed. This is useful for a multitude of reasons: maintaining headset adjustment when switching stems, displaying frame/fork combinations, shipping bikes, etc. Product type. Black.

What is a bolt lock called? ›

A deadbolt lock is a lock bolt that is moved by turning a key or an access control system without the use of a spring. Deadbolt locks are heavier and thicker than your standard spring latch.

What tool is used to cut locks? ›

Bolt cutters are the common tool of choice for to cut padlocks during forcible-entry.

Where do I find my tool box key code? ›

There are a couple different ways to find the lock code for your box. If you still have one of the keys that came with the box, the lock code will be etched on one side. The other would be to look at the external lock cylinder where you insert the key.

How do I change my door pin? ›

You just need to follow the 5 easy steps to change the code.
  1. Step 1: Make sure that the door is open and unlocked. ...
  2. Step2: Touch the Keypad & Enter Codes. ...
  3. Step3: Enter *+01+# ...
  4. Step4: Enter Old Master Code +# ...
  5. Step5: Enter New Master Code. ...
  6. Step6: Repeat to Enter New Master Code.
May 30, 2022

How do I change my lock DIY? ›

  1. Step 1: Remove Existing Lock. Remove the screws on the interior side of the lock, then slide both the interior and exterior sides out of the door.
  2. Step 2: Remove Deadbolt and Faceplate. ...
  3. Step 3: Install New Deadbolt and Faceplate. ...
  4. Step 4: Install New Lock Hardware. ...
  5. Step 5: Install New Strike Plates.
Aug 22, 2022

Where is the Craftsman tool box key code? ›

To purchase Craftsman keys all you need is the code stamped on the face of the lock, then just enter that code into our search box.

Can a locksmith make a key for a toolbox? ›

A locksmith can open your lock using special tools if you've lost the key. Also, they can offer you replacement keys for the toolbox. When it comes to the broken lock, you might consider rekeying.

Can you change your own door locks? ›

Replacing door locks is a relatively simple DIY project. If you know your way around a basic screwdriver, you should be able to tackle it in under an hour. Full installation instructions come with the new locks and customer support hotlines are often available to answer any questions.

How does a push button door lock work? ›

How do they work? Pushbutton locks operate only when the correct buttons are pushed in the proper sequence and the turn knob is rotated. A new combination is set when the lock is installed using as many of the 5 buttons as desired. Buttons may be pressed individually or in unison.

How do you change a lock barrel? ›

To remove the old barrel, start by unscrewing the fixing bolt in the middle. Then turn the key to a slight angle to release the lock, and slide the barrel out. Slide the new barrel into position, then turn the key to lock it into place.

What is the cheapest way to change locks? ›

Due to the extremely low price of the key pins in the locks, rekeying is almost always much cheaper than getting your locks changed. When rekeying your locks, you are only being charged for the labor, whereas when you get your locks changed, you're paying both for labor and parts.

How do you remove a drawer without a lever? ›

Grab the front handle of the drawer, and extend it outward. Pull out on the drawer until you feel resistance. You can also hold onto the front bottom of the drawer if it's easier to pull it out that way, but just be sure to keep your fingers away from the drawer's tracks.

How do you clean a Craftsman tool chest? ›

Put a clean cloth or tarp on the floor and dump everything in your tool box out onto the tarp. Clean the outside of the box with some household cleaner. Clean the inside of the box with a cloth soaked in paint thinner. Clean all the oil and dirt off your tools using a rag soaked with paint thinner.


1. Build a Toolbox Lock System for a DeWalt Tool Chest - How to - DIY
(MintHillBilly DIY)
2. Unlock a Craftsman Toolbox in Seconds
(Joey's Garage)
3. Craftsman Tool Chest Unboxing & Assembly
(Let's Talk!!! Rita Dinnoo)
4. Craftsman 5 Drawer Rolling Tool Cabinet # 997951
5. [361] Snap-On Tool Chest Tubular Lock Picked
6. Lock / Latch from old Craftsman Tool Box
Top Articles
Latest Posts
Article information

Author: Duane Harber

Last Updated: 19/09/2023

Views: 5715

Rating: 4 / 5 (51 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Duane Harber

Birthday: 1999-10-17

Address: Apt. 404 9899 Magnolia Roads, Port Royceville, ID 78186

Phone: +186911129794335

Job: Human Hospitality Planner

Hobby: Listening to music, Orienteering, Knapping, Dance, Mountain biking, Fishing, Pottery

Introduction: My name is Duane Harber, I am a modern, clever, handsome, fair, agreeable, inexpensive, beautiful person who loves writing and wants to share my knowledge and understanding with you.